DD Audio pkg VO-M106-S4 6.5" 100W RMS Midrange Speakers + VO-MBTN Bullet Tweeters

Features Proprietary Long Fibre Cone Pulp With Fabric Surround 30mm Non-Cunducting Fiberglass Coil Former CCA Coil Wire For Increased Efficiency Y35 Strontium Magnet Motor w/ Shorting Ring Shallow Basket with Perimeter Venting Carbon Fiber Dust Cap 98dB Sensitivity 130 – 20kHz Frequency Range Specifications Speaker Size (In): 6.5 Watts RMS: 100 Impedance: S4 VCD (In): 1.25 Frequency Response (Hz): 130 - 20k Fs (Hz): 130 Qms: 12.55 Qes: 1.34 Qts: 1.21 Vas (Liters): 4.5 dBSPL: 98 BL (TM): 4.4 Xmax (In): 4 Suspension Travel (MM): 12 Mounting Diameter (In): 5.6 Mounting Diameter (MM): 142 Mounting Depth (In): 2.5 Mounting Depth (MM): 63 Features Wide Dispersion Horn Profile Titanium Dome Compression Driver Neo Motor System 45mm OD x 34mm Depth Flush Mount Hardware Included Cast Aluminum Body Rear Threaded Mount Specifications Speaker Size (In): 1 Watts RMS: 50 Watts Peak: 100 Impedance: S4 VCD (In): 1 Frequency Response (Hz): 3.5k - 20k dBSPL: 104 Mounting Diameter (In): 1.8 Mounting Diameter (MM): 45 Mounting Depth (In): 1.4 Mounting Depth (MM): 34

• The VO-M106 Voice Optimized midrange speaker is a higher output, higher fidelity driver optimized for maximum efficiency while using minimum RMS power. The ultralight moving mass is driven by a Y35 magnet system utilizing Faraday shorting rings to lower distortion and extend the frequency range. The voice coil is wound from CCA wire on a 30mm diameter, increasing long term thermal efficiency and overall sensitivity which helps it stay cool and efficient during long play times. The water resistant cone material is made with synthetic resin and the dust cap is made from carbon fiber, glued to the coil former working to extend natural high frequency transparency.
• All these careful design elements combine in a shallow basket structure to make installations possible in many factory (OEM) applications. These hand crafted speakers are an excellent upgrade for systems focused on overall power efficiency. Whether you’re running factory power or pairing them with DD’s SS amplifiers, you’ll get louder and cleaner sound with minimal upgrades to your vehicle’s OEM interior.
• The Voice Optimized B1 (1 inch bullet tweeter) entered its fourth generation of development with another exercise in downsize engineering. The result of this successful endeavor is the all new VO-MBTN125 Micro Bullet Tweeter Neo and it comes to you as a full-on compression bullet tweeter, similar in size to a radiating dome tweeter, with flush mountability, bridging the output and clarity of pro audio with the practicality of OEM design.
• With a total diameter of 45mm across and a total depth of 34mm, the VO-MBTN125 is clearly compact, but there’s more than just size contributing to its overall versatility. The new cast aluminum horn tooling incorporates a removable flange and grip ring that facilitates conventional door panel mounting. A threaded bolt hole is included on the back for rear support. The low profile design has been made for use with OEM grills and off the shelf adapter plates, widening the application potential to dashboards, A / B pillar mounting, and soundbar locations previously restricted to lower-power dome tweeters.